Precise details:
Description:
Suitable for steering gear controller, model airplane wireless remote control and analog voltage control. Cooperate with high-torque output of metal gear high-power motor. With current limiting protection function. Easy to install, sturdy and durable. Can be assembled into a steering gear.
Application scope: Wireless follow focus angle servo control; Micro-mechanical angle control; Precise control of valve angle; Camera PTZ remote control; Various occasions requiring angle control.
1. This wiring diagram is the first part to be assembled with the steering gear controller and must be done. No matter which input mode is used, the basic wiring must be done according to this step.
2. Do not reversely connect the positive and negative poles of the power supply, as the reverse connection will burn the controller.
3. The sliding end of the angle feedback potentiometer must be connected to the IN end of the corresponding channel. Wrong connection will cause damage to the controller and potentiometer
Parameter:
Rated voltage: 7V~24V/DC (5V/MIN~24V/MAX, limit voltage)
Quiescent current: less than 25mA
Working angle: related to the maximum electrical stroke of the selected sensor
RC mode: 1ms pulse mode: 1ms~2ms (pulse width)/50HZ (frequency)
2ms pulse mode: 0.5ms~2.5ms (pulse width)/50HZ (frequency)
Analog voltage mode: OV-5V input voltage
Sensitivity: 0% (stopped) ~ 100% (fastest response speed)
Angle scaling: 0%(0°)~100% (maximum angle range)
Application scope: robots, manipulators, manipulators, pan-tilt control, valve control, production line robots, camera pan-tilt control, etc.
Limit voltage: 5V-24V/DC (MAX)
Current limit value: 2.5A +/- 0.1A (MAX)
Working angle: related to the angle sensor used
RC mode: 1ms pulse mode: 1ms~2ms (pulse width) 30Hz~400Hz (frequency)
2ms pulse mode: 0.5ms~2.5ms (pulse width)/30Hz~400Hz (frequency)
Analog voltage mode: OV-5V input voltage
Low-power steering gear controller series
ASMZ-01RC pulse/analog voltage control
Color: red
Material: PCB+metal
Size: 33 x 24 x 6mm
Weight: 4.0g
Package included:
1 x Servo controller