AT AVRISP AVR ISP mkII In-System Programmer ATAVRISP2 AVRISPmkII Compliant
A part of the review has been auto-translated.
Good and Very fast programmer. But the target Voltage must by Connected Externally, or internally connected wire 5V USB to Vtarged MCU with protect by polimer Fuse. I tested with AVR Studio 4.19: 1) Tmega324PA - ISP Work Good. 2.) Attiny 10 - TPI Works Good, also with HV converter for use Reset as output. 3.) AtXmega32A4 - PDI works Good.
Overall the device appears to work and the problem I can work around, but they are still problems none-the-less. The description says it includes a 6-wire multicolour custom connector cable. This did not arrive in the package. Additionally, the image show a single cable from the device with two header, a 10pin and a 6 pin header. However, my device came with only a 10 pin header on the cable, and a 6 pin adapter. This is not an issue. The issue is that the adapter, on the 6 pin side, has two MISO labels, instead of one MISO and one MOSI. Figured it out easy enough, but really should be fixed.