Good and Very fast programmer. But the target Voltage must by Connected Externally, or internally connected wire 5V USB to Vtarged MCU with protect by polimer Fuse. I tested with AVR Studio 4.19: 1) Tmega324PA - ISP Work Good. 2.) Attiny 10 - TPI Works Good, also with HV converter for use Reset as output. 3.) AtXmega32A4 - PDI works Good.

Good and Very fast programmer. But the target Voltage must by Connected Externally, or internally connected wire 5V USB to Vtarged MCU with protect by polimer Fuse. I tested with AVR Studio 4.19: 1) Tmega324PA - ISP Work Good. 2.) Attiny 10 - TPI Works Good, also with HV converter for use Reset as output. 3.) AtXmega32A4 - PDI works Good.

Good and Very fast programmer. But the target Voltage must by Connected Externally, or internally connected wire 5V USB to Vtarged MCU with protect by polimer Fuse. I tested with AVR Studio 4.19: 1) Tmega324PA - ISP Work Good. 2.) Attiny 10 - TPI Works Good, also with HV converter for use Reset as output. 3.) AtXmega32A4 - PDI works Good.

Overall the device appears to work and the problem I can work around, but they are still problems none-the-less. The description says it includes a 6-wire multicolour custom connector cable. This did not arrive in the package. Additionally, the image show a single cable from the device with two header, a 10pin and a 6 pin header. However, my device came with only a 10 pin header on the cable, and a 6 pin adapter. This is not an issue. The issue is that the adapter, on the 6 pin side, has two MISO labels, instead of one MISO and one MOSI. Figured it out easy enough, but really should be fixed.

Overall the device appears to work and the problem I can work around, but they are still problems none-the-less. The description says it includes a 6-wire multicolour custom connector cable. This did not arrive in the package. Additionally, the image show a single cable from the device with two header, a 10pin and a 6 pin header. However, my device came with only a 10 pin header on the cable, and a 6 pin adapter. This is not an issue. The issue is that the adapter, on the 6 pin side, has two MISO labels, instead of one MISO and one MOSI. Figured it out easy enough, but really should be fixed.

Overall the device appears to work and the problem I can work around, but they are still problems none-the-less. The description says it includes a 6-wire multicolour custom connector cable. This did not arrive in the package. Additionally, the image show a single cable from the device with two header, a 10pin and a 6 pin header. However, my device came with only a 10 pin header on the cable, and a 6 pin adapter. This is not an issue. The issue is that the adapter, on the 6 pin side, has two MISO labels, instead of one MISO and one MOSI. Figured it out easy enough, but really should be fixed.