This printer is far from good in its delivered format. It can not heat the bed over 60C (or even to 60C) without waiting ages. You can not reach 100C with the power supply delivered. Also the belt guides are ridigulously bad quality and the washers being used are just plain stupid. But it is possible to get a print out of this printer if you a) update a power supply and use a mosfet (i had to use 1000W power supply from BG (https://www.banggood.com/24V-40A-1000W-Switch-Power-Supply-Driver-AC110220V-Regulated-Switching-Power-Supply-for-LED-Strip-p-1323748.html?rmmds=myorder) and the bed peak draws ¶~550W, needed to fix the guides and added a titan extruder). Had to invest about 100$ more to get a decent print out from this printer. Still the guides needs to be fixed so that the x and y stops skipping (the guides prevents the belts from moving).

This printer is far from good in its delivered format. It can not heat the bed over 60C (or even to 60C) without waiting ages. You can not reach 100C with the power supply delivered. Also the belt guides are ridigulously bad quality and the washers being used are just plain stupid. But it is possible to get a print out of this printer if you a) update a power supply and use a mosfet (i had to use 1000W power supply from BG (https://www.banggood.com/24V-40A-1000W-Switch-Power-Supply-Driver-AC110220V-Regulated-Switching-Power-Supply-for-LED-Strip-p-1323748.html?rmmds=myorder) and the bed peak draws ¶~550W, needed to fix the guides and added a titan extruder). Had to invest about 100$ more to get a decent print out from this printer. Still the guides needs to be fixed so that the x and y stops skipping (the guides prevents the belts from moving).

This printer is far from good in its delivered format. It can not heat the bed over 60C (or even to 60C) without waiting ages. You can not reach 100C with the power supply delivered. Also the belt guides are ridigulously bad quality and the washers being used are just plain stupid. But it is possible to get a print out of this printer if you a) update a power supply and use a mosfet (i had to use 1000W power supply from BG (https://www.banggood.com/24V-40A-1000W-Switch-Power-Supply-Driver-AC110220V-Regulated-Switching-Power-Supply-for-LED-Strip-p-1323748.html?rmmds=myorder) and the bed peak draws ¶~550W, needed to fix the guides and added a titan extruder). Had to invest about 100$ more to get a decent print out from this printer. Still the guides needs to be fixed so that the x and y stops skipping (the guides prevents the belts from moving).

Chegou alguns dias antes do prezo, apenas a embalagem é um pouco frágil para o peso e o tamanho do produto, chegou bem amassada, mas o produto parece estar em ordem, veremos na montagem.

Chegou alguns dias antes do prezo, apenas a embalagem é um pouco frágil para o peso e o tamanho do produto, chegou bem amassada, mas o produto parece estar em ordem, veremos na montagem.

Chegou alguns dias antes do prezo, apenas a embalagem é um pouco frágil para o peso e o tamanho do produto, chegou bem amassada, mas o produto parece estar em ordem, veremos na montagem.