11/06/2017
EMachine Pro DVR Instructions V0.1
==================================
Button Layout
-----------------------------------
| ------------ |
| | SD | |----
| | card | |----
| | | |---- CABLES
| !------------! |----
| < [] > |----
| Prev Enter Next |
|-----------------------------------|
Cable Connector Type: JST-SH, 1mm pitch, 2 x 4-pin, 1 x 6 pin
Power (3.5V to 5V, 180mA).
-------------------------
Apply the power cleanly, otherwise the device may lock up.
Device powers up into standby mode, with blue LED ON continuously.
Powerup Time: wait 8 or 9 secs, before recording can start.
Recordings, following the last auto-save operation (ie. every 10, 20, or
30mins), are lost if power is removed before the recording is stopped.
The Menus
----------
. To Enter the Menus:
Long press the [] button to cycle between: Video Menu -> Setup menu -> Exit.
Video Menu:
Size(Video Resolution),Sound Rec (On/Off), Video Time (None,10,20,30mins).
(Note: Video Time really means AutoSave time. Recommend set to 10mins).
Setup Menu:
Format, Language, SysReset, LightFreq(50/60Hz), TV(PAL/NTSC)
Recording
---------
. To Start Video Recording: Short press > button. LED flashes.
. To Stop Video Recording: Short press > button again. LED lights continuously.
Playback Mode
-------------
. To Enter Playback mode: Long press < button (3 secs).
. To Exit Playback mode: Long press < button again.
. To select a video: short press < or > and press [] to play it.
. To delete a video: select the video and long press [] to enter a sub menu,
which includes "Delete Video" and "Volume set".
Select Delete Video and then Delete Single.
. During playback, press [] to pause/resume playback.
. To abort playback, press [] to pause and then press > (or <) to abort.
. During playback, press < to play forward at X1, X2, X4 or X8 speed.
. During playback, press > to play backwards at X1, X2, X4 or X8 speed.
Note: Minimum AutoSave time is 10mins. I'd prefer a shorter option, like 2mins.
EMachine Pro DVR Instructions V0.1
==================================
Button Layout
-----------------------------------
| ------------ |
| | SD | |----
| | card | |----
| | | |---- CABLES
| !------------! |----
| < [] > |----
| Prev Enter Next |
|-----------------------------------|
Cable Connector Type: JST-SH, 1mm pitch, 2 x 4-pin, 1 x 6 pin
Power (3.5V to 5V, 180mA).
-------------------------
Apply the power cleanly, otherwise the device may lock up.
Device powers up into standby mode, with blue LED ON continuously.
Powerup Time: wait 8 or 9 secs, before recording can start.
Recordings, following the last auto-save operation (ie. every 10, 20, or
30mins), are lost if power is removed before the recording is stopped.
The Menus
----------
. To Enter the Menus:
Long press the [] button to cycle between: Video Menu -> Setup menu -> Exit.
Video Menu:
Size(Video Resolution),Sound Rec (On/Off), Video Time (None,10,20,30mins).
(Note: Video Time really means AutoSave time. Recommend set to 10mins).
Setup Menu:
Format, Language, SysReset, LightFreq(50/60Hz), TV(PAL/NTSC)
Recording
---------
. To Start Video Recording: Short press > button. LED flashes.
. To Stop Video Recording: Short press > button again. LED lights continuously.
Playback Mode
-------------
. To Enter Playback mode: Long press < button (3 secs).
. To Exit Playback mode: Long press < button again.
. To select a video: short press < or > and press [] to play it.
. To delete a video: select the video and long press [] to enter a sub menu,
which includes "Delete Video" and "Volume set".
Select Delete Video and then Delete Single.
. During playback, press [] to pause/resume playback.
. To abort playback, press [] to pause and then press > (or <) to abort.
. During playback, press < to play forward at X1, X2, X4 or X8 speed.
. During playback, press > to play backwards at X1, X2, X4 or X8 speed.
Note: Minimum AutoSave time is 10mins. I'd prefer a shorter option, like 2mins.
EMachine Pro DVR Instructions V0.1
==================================
Button Layout
-----------------------------------
| ------------ |
| | SD | |----
| | card | |----
| | | |---- CABLES
| !------------! |----
| < [] > |----
| Prev Enter Next |
|-----------------------------------|
Cable Connector Type: JST-SH, 1mm pitch, 2 x 4-pin, 1 x 6 pin
Power (3.5V to 5V, 180mA).
-------------------------
Apply the power cleanly, otherwise the device may lock up.
Device powers up into standby mode, with blue LED ON continuously.
Powerup Time: wait 8 or 9 secs, before recording can start.
Recordings, following the last auto-save operation (ie. every 10, 20, or
30mins), are lost if power is removed before the recording is stopped.
The Menus
----------
. To Enter the Menus:
Long press the [] button to cycle between: Video Menu -> Setup menu -> Exit.
Video Menu:
Size(Video Resolution),Sound Rec (On/Off), Video Time (None,10,20,30mins).
(Note: Video Time really means AutoSave time. Recommend set to 10mins).
Setup Menu:
Format, Language, SysReset, LightFreq(50/60Hz), TV(PAL/NTSC)
Recording
---------
. To Start Video Recording: Short press > button. LED flashes.
. To Stop Video Recording: Short press > button again. LED lights continuously.
Playback Mode
-------------
. To Enter Playback mode: Long press < button (3 secs).
. To Exit Playback mode: Long press < button again.
. To select a video: short press < or > and press [] to play it.
. To delete a video: select the video and long press [] to enter a sub menu,
which includes "Delete Video" and "Volume set".
Select Delete Video and then Delete Single.
. During playback, press [] to pause/resume playback.
. To abort playback, press [] to pause and then press > (or <) to abort.
. During playback, press < to play forward at X1, X2, X4 or X8 speed.
. During playback, press > to play backwards at X1, X2, X4 or X8 speed.
Note: Minimum AutoSave time is 10mins. I'd prefer a shorter option, like 2mins.