Mini SU27/J-15/F-22 Aircraft 300mm Wingspan Micro Warplane RC Airplane KIT/PNP
A part of the review has been auto-translated.
Cool plane, but has some issues. -PNP version comes with motor, prop, 2 servos, and a flight controller. IT DOES NOT INCLUDE A RECEIVER. -There are no instructions, though it's fairly simple to assemble. Use a foam safe contact cement like Foam-Tac. -I bought another 1mm carbon fiber rod to reinforce the tail section just before the elevators (there are two holes already on the foam to mark the length). -Center fuselage is too narrow to hold a 400mAh battery and needs some shimming. -I cut the fuselage/nose piece in half, so I could install the top first, then the bottom so I wouldn't get glue all over the place. -The included flight controller (with the PNP) has a gyroscope and elevon mixing, but only provides 3.3v for receiver power, so make sure your RX can work on 3.3v. I haven't tested this, but you might be able to control it using wifi: -The contact pads on the back seem to be for use with a ESP8266 WSP-12F wifi module. Banggood sells one that might work. https://www.banggood.com/ESP8266-ESP-12F-Remote-Serial-Port-WIFI-Transceiver-Wireless-Module-p-1007260.html?cur_warehouse=CN&rmmds=search -To use the wifi module, you need to download the DF GO app. Use the wayback machine and install from the apk since their website is out of commission. https://web.archive.org/web/20190415221039/http://www.dfrchobby.com/?p=19
really great, considering the price, but the receiver, I guess it will have built-in esc,since it does not come apart,I have no idea how to connect it, to be able to use it, so I will have to do without it and add the rest of the electronics to fly, however, it is totally recommended
Fast shipping to Germany! Excellent flight model. But how to bind the receiver with Flysky i6 transmitter?
Fast shipping to Germany! Great flight model,very small and light. But no idea how to tie the receiver with the Flysky i6 remote control 😔
Great run. Model was already here after 18 days. Super price performance. In the PNP version really ALL at. Motor incl. motor carrier, servos, connecting rods, rudder horns, prop and even a FlySky receiver for the connection of 2 servos(thus with tail mixing function) and regulator for the motor. A USB charging unit is also included. Super great at the price!!!
Nice assembly kit, foam model elements, petite galantry. The PNP kit comes with a motor, 2 serve, USB charger and micro receiver, but there is no instruction to assemble a model and connect the receiver which has a lot of free pins and no known where to plug the power, antenna, etc. On the receiver and model is the designation "DF" and it is not known what the companyjQuery is111309881808802453647_1632924466538?
Flies amazingly well. I couldn't get the included controller to work. But with a micro receiver with the right connections it worked.
Good
Very good
ok 👌