I built the GEE BEE last week end. The version I ordered had the motor and servos with the plane. I am an experienced balsa builder, I am gaining more skills with each plane I build. this was my first "kit build" in foam. The foam cutting was excellent, the decal sheet provided a great finish. the decals were a little time consuming, I would like to see them cut with the same precision as the foam and wood parts. i flew it on Wednesday in an indoor soccer field (old hockey arena) I was expecting a slow floater with the tiny prop and control surfaces, NOPE this is an R1 RACER. after a little trimming was very managable in tight quarters. I found the info available online for building advise useful. I would have liked all of the soldering complete for plug and play operation. I did not attach the "wheels" to allow the CG to be placed correctly. i found upon flying the CG called for is a little forward and am moving the battery back in small increments. a great plane for some one with a little building and flying experiece. This is not a plane for a first time flyer

I built the GEE BEE last week end. The version I ordered had the motor and servos with the plane. I am an experienced balsa builder, I am gaining more skills with each plane I build. this was my first "kit build" in foam. The foam cutting was excellent, the decal sheet provided a great finish. the decals were a little time consuming, I would like to see them cut with the same precision as the foam and wood parts. i flew it on Wednesday in an indoor soccer field (old hockey arena) I was expecting a slow floater with the tiny prop and control surfaces, NOPE this is an R1 RACER. after a little trimming was very managable in tight quarters. I found the info available online for building advise useful. I would have liked all of the soldering complete for plug and play operation. I did not attach the "wheels" to allow the CG to be placed correctly. i found upon flying the CG called for is a little forward and am moving the battery back in small increments. a great plane for some one with a little building and flying experiece. This is not a plane for a first time flyer

I built the GEE BEE last week end. The version I ordered had the motor and servos with the plane. I am an experienced balsa builder, I am gaining more skills with each plane I build. this was my first "kit build" in foam. The foam cutting was excellent, the decal sheet provided a great finish. the decals were a little time consuming, I would like to see them cut with the same precision as the foam and wood parts. i flew it on Wednesday in an indoor soccer field (old hockey arena) I was expecting a slow floater with the tiny prop and control surfaces, NOPE this is an R1 RACER. after a little trimming was very managable in tight quarters. I found the info available online for building advise useful. I would have liked all of the soldering complete for plug and play operation. I did not attach the "wheels" to allow the CG to be placed correctly. i found upon flying the CG called for is a little forward and am moving the battery back in small increments. a great plane for some one with a little building and flying experiece. This is not a plane for a first time flyer

superbe en vol mais vol un peu rapide en salle de sport 😀

superbe en vol mais vol un peu rapide en salle de sport 😀

superbe en vol mais vol un peu rapide en salle de sport 😀

https://youtu.be/02JZ1tUQ5ac

https://youtu.be/02JZ1tUQ5ac

https://youtu.be/02JZ1tUQ5ac

Have not flown as yet, but everything was very well packaged, and went together smoothly. My only complaint was the initial shaving down of the rubber and elevator "connective tissues" for increased throw, that was very dicey.

Have not flown as yet, but everything was very well packaged, and went together smoothly. My only complaint was the initial shaving down of the rubber and elevator "connective tissues" for increased throw, that was very dicey.

Have not flown as yet, but everything was very well packaged, and went together smoothly. My only complaint was the initial shaving down of the rubber and elevator "connective tissues" for increased throw, that was very dicey.

Товар доставили быстро 10 дней в Саратов. Даже Почта России быстро сработала. Товар качественный, все детали вырезаны на пенопластовых пластинах толщиной 3мм , наклейки сделаны на отдельных листах. Подкосы для придания V образности крыла и площадка для серво сделаны из 3мм фанеры. Только забыли положить фанерку с кабанчиками рулей высоты и направления, пидется делать самому. Тяги для рулей карбон, есть наконечники для тяг из тонкой проволоки. Инструкции нет, нужно скачивать по ссылке в описании и та на китайском языке.Рулевые машинки и мотор проверить еще не успел (потом допишу) Детали упакованы в целофановый пакет и пупырчатую пленку, и все это упаковано в картонную коробку.

Товар доставили быстро 10 дней в Саратов. Даже Почта России быстро сработала. Товар качественный, все детали вырезаны на пенопластовых пластинах толщиной 3мм , наклейки сделаны на отдельных листах. Подкосы для придания V образности крыла и площадка для серво сделаны из 3мм фанеры. Только забыли положить фанерку с кабанчиками рулей высоты и направления, пидется делать самому. Тяги для рулей карбон, есть наконечники для тяг из тонкой проволоки. Инструкции нет, нужно скачивать по ссылке в описании и та на китайском языке.Рулевые машинки и мотор проверить еще не успел (потом допишу) Детали упакованы в целофановый пакет и пупырчатую пленку, и все это упаковано в картонную коробку.

Товар доставили быстро 10 дней в Саратов. Даже Почта России быстро сработала. Товар качественный, все детали вырезаны на пенопластовых пластинах толщиной 3мм , наклейки сделаны на отдельных листах. Подкосы для придания V образности крыла и площадка для серво сделаны из 3мм фанеры. Только забыли положить фанерку с кабанчиками рулей высоты и направления, пидется делать самому. Тяги для рулей карбон, есть наконечники для тяг из тонкой проволоки. Инструкции нет, нужно скачивать по ссылке в описании и та на китайском языке.Рулевые машинки и мотор проверить еще не успел (потом допишу) Детали упакованы в целофановый пакет и пупырчатую пленку, и все это упаковано в картонную коробку.

Perfect

Perfect

Perfect

I have not finished assembling this plane no directions and the design a bit odd

I have not finished assembling this plane no directions and the design a bit odd

I have not finished assembling this plane no directions and the design a bit odd

This plane is fast (not a slow flyer) landing gear/wheels bend rally easy after a few hard landings, recommend sone carbon rod to stiffen the landing gear

This plane is fast (not a slow flyer) landing gear/wheels bend rally easy after a few hard landings, recommend sone carbon rod to stiffen the landing gear

This plane is fast (not a slow flyer) landing gear/wheels bend rally easy after a few hard landings, recommend sone carbon rod to stiffen the landing gear

No concern at this moment

No concern at this moment

No concern at this moment

I bought it for my daughter and great product. Thank you.

I bought it for my daughter and great product. Thank you.

I bought it for my daughter and great product. Thank you.