The kit arrived fast and well packed in a small box. It seems that mine is a classic 3/4mm model with replaced arms for those sturdier, but heavier 5mm ones. This also means that the columns are not black as in the pictures but red ones as the original had. One disappointment is that it misses those nuts, specific for the new 5mm version on the bottom plate. Included were also the landing skids, however intended for the 3mm arms these are useless - they can not be attached to the 5mm version. That being said, overall quality is real good, but the edges are really sharp so carefull with cables. The top plate had a minor visual deffect, it looks like the carbon structure look has been sanded off - but it is not that much visible. What I do not like is that the motors are sticking out of the arm's base so in a crash they maight be damaged, so consider ordering the protective mounts for motors. Included are also spare bolts/nuts in case You lose some. Assembled weight is 166g. Overall, for this price You get a solid frame for great price. Here are the pros/cons: + sturdy + easy to build + spare screws/nuts + lot of space for electronics + spare parts and lots of accessories available for this frame + 6 inch blades can be used - no skids (foam pads can be purchased separately) - columns were red not black - camera can not be tilted - sharp edges - you need to make the hole for VTX antenna bigger to fit

The kit arrived fast and well packed in a small box. It seems that mine is a classic 3/4mm model with replaced arms for those sturdier, but heavier 5mm ones. This also means that the columns are not black as in the pictures but red ones as the original had. One disappointment is that it misses those nuts, specific for the new 5mm version on the bottom plate. Included were also the landing skids, however intended for the 3mm arms these are useless - they can not be attached to the 5mm version. That being said, overall quality is real good, but the edges are really sharp so carefull with cables. The top plate had a minor visual deffect, it looks like the carbon structure look has been sanded off - but it is not that much visible. What I do not like is that the motors are sticking out of the arm's base so in a crash they maight be damaged, so consider ordering the protective mounts for motors. Included are also spare bolts/nuts in case You lose some. Assembled weight is 166g. Overall, for this price You get a solid frame for great price. Here are the pros/cons: + sturdy + easy to build + spare screws/nuts + lot of space for electronics + spare parts and lots of accessories available for this frame + 6 inch blades can be used - no skids (foam pads can be purchased separately) - columns were red not black - camera can not be tilted - sharp edges - you need to make the hole for VTX antenna bigger to fit

The kit arrived fast and well packed in a small box. It seems that mine is a classic 3/4mm model with replaced arms for those sturdier, but heavier 5mm ones. This also means that the columns are not black as in the pictures but red ones as the original had. One disappointment is that it misses those nuts, specific for the new 5mm version on the bottom plate. Included were also the landing skids, however intended for the 3mm arms these are useless - they can not be attached to the 5mm version. That being said, overall quality is real good, but the edges are really sharp so carefull with cables. The top plate had a minor visual deffect, it looks like the carbon structure look has been sanded off - but it is not that much visible. What I do not like is that the motors are sticking out of the arm's base so in a crash they maight be damaged, so consider ordering the protective mounts for motors. Included are also spare bolts/nuts in case You lose some. Assembled weight is 166g. Overall, for this price You get a solid frame for great price. Here are the pros/cons: + sturdy + easy to build + spare screws/nuts + lot of space for electronics + spare parts and lots of accessories available for this frame + 6 inch blades can be used - no skids (foam pads can be purchased separately) - columns were red not black - camera can not be tilted - sharp edges - you need to make the hole for VTX antenna bigger to fit

I ordered 2 of this product (first time in june 2016, second in september) and I recieved 2 different version : for the 2 version, the arms are 5mm, but the others carbon peces were 2mm for the old one, and the new it's 1,5mm... Instead of the weight, it's less solid. The integrate nut for the old one are now separated. The standoffs were black, now they're red. The hole in the upper back position is smaller so it's not possible to instal the FPV antenna like I in the oldest version. The packadjing is better for the new version (a little box) (I noticed that the racer which is mounted is the oldest version)

I ordered 2 of this product (first time in june 2016, second in september) and I recieved 2 different version : for the 2 version, the arms are 5mm, but the others carbon peces were 2mm for the old one, and the new it's 1,5mm... Instead of the weight, it's less solid. The integrate nut for the old one are now separated. The standoffs were black, now they're red. The hole in the upper back position is smaller so it's not possible to instal the FPV antenna like I in the oldest version. The packadjing is better for the new version (a little box) (I noticed that the racer which is mounted is the oldest version)

I ordered 2 of this product (first time in june 2016, second in september) and I recieved 2 different version : for the 2 version, the arms are 5mm, but the others carbon peces were 2mm for the old one, and the new it's 1,5mm... Instead of the weight, it's less solid. The integrate nut for the old one are now separated. The standoffs were black, now they're red. The hole in the upper back position is smaller so it's not possible to instal the FPV antenna like I in the oldest version. The packadjing is better for the new version (a little box) (I noticed that the racer which is mounted is the oldest version)