I bought this to convert the main motor on my brushed V913 to a BL motor. The new BL PCB has 2 major differences than the stock brushed PCB. The main motor MOSFET and plastic motor connector is missing on the PCB where the old ones had a large MOSFET and a female connector for the motor. There are now 3 servo connections where the old PCB only had 2. The extra one is inboard and is where the ESC is connected via the 3-wire connector. A female JST connector (not provided) must be soldered to where the old motor connector used to be. The new ESC is powered via the JST connector. The new V913 BL PCB worked as advertised. It looks identical to the V912 BL PCB. In fact mine says on the back JR--WL-V912R-3, REV01, 2014.01.18. I would recommend buying the V912 BL ESC since it is the identical and less expensive.

I bought this to convert the main motor on my brushed V913 to a BL motor. The new BL PCB has 2 major differences than the stock brushed PCB. The main motor MOSFET and plastic motor connector is missing on the PCB where the old ones had a large MOSFET and a female connector for the motor. There are now 3 servo connections where the old PCB only had 2. The extra one is inboard and is where the ESC is connected via the 3-wire connector. A female JST connector (not provided) must be soldered to where the old motor connector used to be. The new ESC is powered via the JST connector. The new V913 BL PCB worked as advertised. It looks identical to the V912 BL PCB. In fact mine says on the back JR--WL-V912R-3, REV01, 2014.01.18. I would recommend buying the V912 BL ESC since it is the identical and less expensive.

I bought this to convert the main motor on my brushed V913 to a BL motor. The new BL PCB has 2 major differences than the stock brushed PCB. The main motor MOSFET and plastic motor connector is missing on the PCB where the old ones had a large MOSFET and a female connector for the motor. There are now 3 servo connections where the old PCB only had 2. The extra one is inboard and is where the ESC is connected via the 3-wire connector. A female JST connector (not provided) must be soldered to where the old motor connector used to be. The new ESC is powered via the JST connector. The new V913 BL PCB worked as advertised. It looks identical to the V912 BL PCB. In fact mine says on the back JR--WL-V912R-3, REV01, 2014.01.18. I would recommend buying the V912 BL ESC since it is the identical and less expensive.

O Banggood oferece produtos com excelente custo/benefício. Mais de 200 compras realizadas e tive somente 4 problemas e foram resolvidos.

O Banggood oferece produtos com excelente custo/benefício. Mais de 200 compras realizadas e tive somente 4 problemas e foram resolvidos.

O Banggood oferece produtos com excelente custo/benefício. Mais de 200 compras realizadas e tive somente 4 problemas e foram resolvidos.