Graeme
- My Contents
- All Messages
- Reviews
- Comments
- Answers
- Questions
Answers
Graeme Racerstar BR3536 1200KV with 40A ESC 10x5, 10x6 prop 3S 2200mAh battery the 10x5 prop will be fine and do any aero's you want but the 10x6 will give extra speed. the setup above will balence the model nicely on the CG
Helpful (0)Q: does this model come with building plans
Asked by rcbrian on 2020-06-19 09:26:02
Graeme mine included a plan for the wings but not the fusalage.
Helpful (0)
Q: where is the CG on this airplane?
Asked by Toeny on 2021-02-26 08:05:18
Graeme I fly mine with the CG at 115mm (4.5 inches) back from the leading edge. Flies really well with this. This happens to be if you balance it up side down and put your fingers immediately behind, (but not pushing on) the wing retaining lugs.
Helpful (0)
Q: Can I connect it directly to USB and use is as a Zoom camera?
Asked by BG154853943 on 2020-06-20 23:35:18
Graeme Yes but you will need a separate micrphone
Helpful (1)Q: what would be a good motor tonuse on this model?? thanks
Asked by cristianoepm on 2021-01-18 10:26:43
Graeme Racerstar BR3536 1200KV 2-4S with 40A ESC 11x5 or 10x6 prop 3S 2200mAh battery
Helpful (0)
Q: Can I change a little the output voltage, i.e. up to 28V?
Asked by iw4blg on 2018-11-09 04:09:59
Graeme Be aware that if the voltage is adjusted far from the supplies design voltage that its efficiency will be reduced and you would risk damage to still use it for 400w or 16A. The voltage adjustment is ment to trim the voltage so you can get an accurate 24.0v despite other manufacturing tolerances. It is not intended to give you a variable supply.
Helpful (0)
Graeme it is designed to replace a lighter socket. it does not fit in one.
Helpful (1)