steliospergantis
- My Contents
- All Messages
- Reviews
- Comments
- Answers
- Questions
Answers
Q: What wire gauge or wires should be used to extend the connections?
Asked by BG551224048 on 2023-12-27 14:03:49
steliospergantis 6mm2multi-stranded wire
Helpful (0)
steliospergantis Usinga Lipo 3S 11.1V 2200mAh the are two (2) options: (I feel it will be a bit nose heavy with that battery) 1. proppeler 10X6, brushless motor size 2212 1000KV, ESC 30A, battery 3S Lipo 11.1V (I use 1500mAh bat) : aerobatic glider 2. proppeler 9x5, brushless motor size 2212 1400KV, ESC 30A, battery 3S Lipo 11.1V (better bat 1500mAh - 1800mAh) : hot stunt glider
Helpful (0)Q: hi,,,,will it work with 1000kv racestar brushless motor?
Asked by Danial Musood on 2018-03-27 11:29:26
steliospergantis Yes,with the motor size 2212
Helpful (0)
steliospergantis You need (all the above X4): 1. Allen type M3X35mm screw (1pc) 2. Alluminium tube Φ4 (outside dia, inside Φ3). Cut it at 25(+0,5)mm length. The racestar has 25mm length (excluding hub+axle). (1pc) 3. M3 nuts (2pcs) 4. Φ3+ washer (1pc). If you need photos e-mail me at stelios.pergantis@gmail.com S.P.
Helpful (0)
steliospergantis Itdepends on the load (used motor and prop).
Helpful (0)Q: Does the PNP version include a 6axis feature for flight stabilization ?
Asked by rrossi35 on 2020-05-07 17:10:38
steliospergantis Itis not included. The glider balance perfectly and there is room for the appropriate battery shifting for aligning the cg to the marks of the wing. The glider does not need any flight stabilisation.
Helpful (1)
Q: what connector should i use for the rc plane conection?
Asked by davi_bruder on 2022-07-21 20:34:17
steliospergantis You must match the connectors according to your existing battery and motor connectors.Usual battery connector is XT60. For the motor side, in this ESC category (60A), I am using 3,5mm bullet connectors.
Helpful (0)
steliospergantis Right-hand rotation: in front view the prop rotates CCW. looking from the back CW.
Helpful (0)