_Red
_Red You don't need an UK plug. It's removable, you can use a matching UK plug.
2024-04-10 06:08:51 Helpful (0)
_Red Try a ground loop isolator. Even if there is no ground loop, it should at least reduce noise.
Q: Can i use lipo battery with this
Asked by Shivam on 2018-08-31 08:56:25
_Red Yes as long as it is 1S (one cell in series).
2024-04-08 05:04:33 Helpful (0)Q: is it current limiter or regulator?
Asked by Florent Lecroq on 2021-08-09 11:58:05
_Red It's a regulator. If you need to limit current, wire a high power resistor in series.
2024-03-28 11:02:02 Helpful (0)
_Red No, this is a buck converter. It can't boost.
2024-03-28 11:01:19 Helpful (0)
_Red It seems to be a common cathode two-color LED. You can just desolder it and extend it out with some wire, making sure the polarity is correct, or split it into two separate LEDs. To do this, connect both cathodes of the LEDs together and solder them to the middle hole. Then solder the anodes to the remaining two holes.
2024-03-28 11:00:24 Helpful (0)Q: posso utilizzarlo per aumentare la tensione da 12 v a 18 v?
Asked by Pasquale Palladino on 2020-05-10 03:21:47
_Red This is a buck converter. It can only convert from a higher voltage to lower voltage. What you need is a boost converter.
2024-03-28 10:50:48 Helpful (0)
_Red It's a kit. That's the point of a kit, it's sold without electronics and fully unassembled.
2024-03-27 08:23:18 Helpful (0)Q: Does this multimeter able to measure 0...20 mA DC current?
Asked by pdomonics on 2023-08-03 12:01:19
_Red Looks like it cannot measure current
2024-03-19 06:57:35 Helpful (0)
_Red Hold down the power button
2024-03-19 06:55:55 Helpful (0)
_Red Man, that's disappointing. I guess the price is too good to be true.
_Red This is a power supply, why would it come with amber?
2024-03-07 07:23:09 Helpful (0)
_Red Technically the power supply doesn't care which is which, but correct wiring is good safety practice. Live goes to L, Neutral goes to N. The yellow-green wire needs to be significantly longer than both L and N.
2024-03-07 07:11:47 Helpful (0)Q: Bonjour est ce qu'il est compatible avec lunettes DJi integra .
Asked by manolin on 2024-01-12 02:18:03
_Red It should work with all dji goggles.
2024-03-06 05:09:52 Helpful (0)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
_Red The large board seems to be mostly a breakout board with voltage regulator, usb-c port and presumably a usb communication chip to interface with the radar chip.
2024-05-02 06:56:50 Helpful (0)