ziggysmate
My Contents
All Messages
Reviews
Comments
Answers
Questions

All Messages

ziggysmate 12/10/2020
Just as good as the original OEM, probably made in the same factory as all molding marks are identical.
Quick-release Foldable Propeller for FIMI X8 SE/FIMI X8 SE 2020 RC Quadcopter
US$5.99 US$11.99
0
Recommendations
Comments (0)
ziggysmate 12/10/2020
Well made Can't use them as I sold my drone due to poor Fimi service.
Sunnylife 1Pair Antenna Signal Booster for FIMI X8 SE 2020 Transmission
US$7.26 US$11.99
0
Recommendations
Comments (0)
ziggysmate 24/09/2020
Nice firm props, Not floppy and flexible like some others. I replaced all my quad props with these.
Gemfan 1045 10x4.5 10 Inch Carbon Nylon Propeller For DJI RC Drone FPV Racing Multi Rotor
US$5.39 US$8.99
0
Recommendations
Comments (0)
ziggysmate 24/09/2020
Perfectly good props. Been flying them and no problems. Can't see any difference between them and the OEM ones.
Quick-release Foldable Propeller for FIMI X8 SE/FIMI X8 SE 2020 RC Quadcopter
US$5.99 US$11.99
0
Recommendations
Comments (0)
ziggysmate 24/09/2020
The cover fits well, is well made and protects the cam when packed in the case.
Sunnylife Gimbal Camera Protector Transparent Grey Cover XMI11 for FIMI X8 SE/FIMI X8 SE 2022 RC Quadcopter
US$8.99 US$13.99
0
Recommendations
Comments (0)
ziggysmate 27/07/2018
The camera is OK but I expected better. I tried quite a few settings and found I had to adjust the lens to get a decent distance focus. Original focusing was set too close. Even with the settings I have used it still tends to have fisheye at the top of the video. I would have preferred a 90 degree lens as I don't believe this one is a true 120 degrees. It is also affected by light changes quite badly compared to other cameras I have. It needs good light to produce any decent kind of video and loses a lot of definition on a cloudy day. I have some SJ 4000 cams that produce nicer videos. Don't expect too much from the onboard gyro. Whilst it does have an effect, it is more of a gimmick. Best video produced was on 1080 x 60 frames as the higher resolutions become very jerky.
Hawkeye Firefly Q6 4K 1080P 60FPS HD Mini Camera for FPV Racer
US$55.99 US$81.59
2
Recommendations
Comments (0)
2.4G Wireless Wifi Telemetry Module With Antenna For Pixhawk APM MiniAPM Flight Controller
US$17.99 US$21.99

Q: What is the type of the antenna and the connector? How can I install a new one?

Asked by Kaan Aykol on 2019-08-30 11:24:41

ziggysmate The connector is specifically for a Pixhawk Flight controller (2.4.8) Nothing else.

2019-09-02 07:57:00 Helpful (0)
Submit
Answers (2)
ziggysmate 24/04/2018
Well I got caught badly. Bangood are selling this item from the Australian Warehouse and Australia no longer has a 2G network that this item requires to operate. :( So after some research I found all our 2G networks were shut down in 2017. I am a bit peeved but realise it is my own fault however I am also peeved at Banggood for selling the item here in Australia.
Real time Mini Vehicle GSM GPRS GPS Tracker Motorcycle Car Vehicle Tracking Locator Device TK102
US$21.81
3
Recommendations
Comments (0)
ziggysmate 07/03/2019
Just plug it into my PX4 and it works. I have 2 and the range is excellent for my Quads.
2.4G Wireless Wifi Telemetry Module With Antenna For Pixhawk APM MiniAPM Flight Controller
US$17.99 US$21.99
0
Recommendations
Comments (0)
ziggysmate 21/09/2018
These are great motors. This is the second set I have ordered. The first set has performed up to my expectations. I use these motors on a Hobby King Dart 450 and are used mainly for missions but also some freestyle. They are very economical on batteries, never get more than very slightly warm and are super reliable. I run them on 3S 2200mAh batts with 10 x 4.5 props. DJI style props are best but other types can be used if they are drilled out with step drills that Banggood sells.
4X Racerstar Racing Edition 2216 BR2216 810KV 2-4S Brushless Motor For 350 380 400 450 RC Drone FPV Racing
US$34.51 US$58.99
0
Recommendations
Comments (0)

ziggysmate Try using 10x4.5 props. My buddy uses them on his Tarot 650 and it has heaps of power.

Rasidi 16/11/2017
I bought this for my Tarot 650 (I know it's not recommended) with a 30A Simonk ESC and 12 inch propellers. It can carry 1.8 KG without an issues. Once I added gimbal which total up to be 2 KG that's when it has trouble lifting up. I used a wood drill to drill the propeller hole to 8-inch. Then I tighten the nut tightly with the propeller to prevent it to move while flying. It was difficult. This is a strong motor that is good for smaller size quadcopter and I'll recommend it.
4X Racerstar Racing Edition 2216 BR2216 810KV 2-4S Brushless Motor For 350 380 400 450 RC Drone FPV Racing
US$34.51 US$58.99
1
Comments (2)
ziggysmate 10/08/2018
I had to buy one to replace one I inadvertently wired incorrectly. :( I have bought another 2 x full sets of 4 and love these ones. Very small and light and 100% reliable so far.
Racerstar RS30A 30A Blheli_S OPTO 2-4S Brushless ESC Support 16.5 Dshot150 Dshot300 for RC Drone FPV Racing
US$13.43 US$19.99
0
Recommendations
Comments (0)

ziggysmate I have had my quad out to 300 meters and then only lose signal because I am too low behind trees. If I was at higher altitude I'm sure it would be even better. My 915 mHz Telemetry goes the same distance. The great thing is it works with my iPad Pro. I'm Rapt.

cuchara 04/05/2017
Very simple seems to work fine in very short distance 10-15m But the description says (2400M-2483M)... Must say (2400M-2483mm)
2.4G Wireless Wifi Telemetry Module With Antenna For Pixhawk APM MiniAPM Flight Controller
US$17.99 US$21.99
0
Comments (2)

ziggysmate Don't think that matters, Mine is on Public Network

Bruce 21/02/2018
Unit works very well. Range is ok for the distance I am using it at. Worked right away with QGround control. When using Mission Planner make sure that the WiFi in Windows has the "Home Network" selected or it will not connect.
2.4G Wireless Wifi Telemetry Module With Antenna For Pixhawk APM MiniAPM Flight Controller
US$17.99 US$21.99
0
Comments (1)
ziggysmate 06/07/2018
I already have a 3DR telemetry Radio on one of my Quads and thought this would be a good option for my other Quad. It is. It works well and I have programmed several missions using it OK. The range is way better than I expected but I haven't checked the limits yet but it would be at least 200 meters. It was sending back tracking info without a glitch. I will definitely buy another one for my 3rd PX4 now I know it works so well and it is much smaller and more compact that the 3DR Telemetry Radio. (and a LOT cheaper too)
2.4G Wireless Wifi Telemetry Module With Antenna For Pixhawk APM MiniAPM Flight Controller
US$17.99 US$21.99
0
Recommendations
Comments (0)
ziggysmate 06/07/2018
I need glasses to see it but it is clear and provides all the necessary info.
CUAV PIX_DISPLAY I2C OLED Monitor for Pixhack/Pixhawk FPV Multicopters
US$13.99 US$23.99
0
Recommendations
Comments (0)
ziggysmate 06/07/2018
Haven't had the time to check it
Mini OSD Module for APM Pixhawk Pixhack Flight Controller Board
US$13.79 US$20.99
0
Recommendations
Comments (0)

ziggysmate These motors would not work on my 600 quad with 12x4.5 CF props. Secondly do not use green multistar batteries. Your quad will definitely fall out of the sky within a couple of minutes. HOWEVER, these are working perfectly on a Dart 450 with 10x4.5 slowfly props and a 3S Turnigy Nano Tech battery. I get a full 7 minutes flying time. A 4S on this quad will NOT work. Apart from that I love the motors except theHex Keys are rubbish as are the 3 screws that hold the hub on. They are very soft.

benchiedu 20/08/2015
I have had these motors on my quad (Ironman 650) and since I built it(January, 2015), I have been running it with 4 cell batteries. Recently, I bought some 3 cell batteries to fly it with and after 3 mins hover it starts to loose power and descend rapidly, even when full throttle is applied. My craft weighs 2.5kg and i'm running the naza v2. Propellers are carbon fibre 12' blades and powered with multistar 5200mah 4 cell lipo. I am an experienced drone pilot and have avoided countless crashes but the last time I flew it with a 3 cell, I broke my landing gear cos it literally fell out the sky from about 10metres. Anyone having same experience? Regardless, I love these motors as they come well balances and run quietly.
EMAX MT3506 KV650 Brushless Mutil-Axis Motor For RC Models
US$30.67 US$45.99
6
Comments (1)
ziggysmate 14/05/2018
These are brilliant for reaming Propellors out . I bought some Racersatar motors and the shafts are 6mm and 8 mm. You need to ream the props out and 2 of these reamers do the job perfectly and quickly. They were well worth the money as props can be difficult to drill to an oversize. These make it dead easy.
Drillpro 3Pcs 1/4 Inch Hex Shank HSS Titanium Coated Step Drill Bit Set 3-12/4-12/4-20mm
US$5.99 US$29.99
0
Recommendations
Comments (0)

ziggysmate I suggest you mount it on a pole and then check your magnetometer as it is very close to your ESCs where you have it. Too much interference.

cshep70 06/08/2017
I have this mounted on my top plate, not a mast. The GPS is SPOT ON. The magnetometer, not so much. It would probably prefer a boom, but INAV has RTH'd 8/8 times successfully in test runs, so no complaints!
Flight Controller GPS with Protective Shell for PIX PX4 Pixhawk
US$20.64 US$30.83
5
Comments (1)

You are the expert,can you help?

We sincerely invite you to subscribe to the Invite Answer email!

If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.

Help others and be happier!

  • Subscribe

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.Specific people will also have their own exclusive badge.
CEO Badge

The CEO Badge is owned only by the boss of Banggood.

Badges you can earn are coming soon
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe