dumle115
My Contents
All Messages
Reviews
Comments
Answers
Questions

All Messages

Realacc Trident U.FL IPX IPEX 5.8G 2dBi Omni Directional Linear FPV Antenna for RC Drone
US$3.72 US$4.74

Q: is it better than simple whip antenna?

Asked by dumle115 on 2019-09-13 01:28:51

Panos1989 Yes.

2023-07-21 03:47:35 Helpful (1)
Submit
Answers (2)
dumle115 06/01/2022
The front light is good. Separately both, the wide beam and the narrow beam work well. The problem is switching between them on the ride, when the situation needs its. Scenario: im riding throght a city, I'm using the wide beam and then I'm heading toward dark forest. I'd like to add a narrow beam to the wide beam which was already in use. You can't. You can easily switch between the first OR the second one, but you can't add one to another. You can switch on both of them simultaneously, but you also have to switch them off both, and the once again go through all the clicks to select your prefered light. Of course all the clicks are related to going throught all the power levels, flashes etc. It's just unintuitive and frustrating. The execution itself is very good. The rear light is just a sh*t and I'm not going to use it. I'll keep my old one.
Astrolux® BL02 Bike Light Set 1200lm 5 Modes USB Rechargeable Headlight 5000mAh Power Bank with 4 Modes Taillight
US$33.95 US$55.99
1
Recommendations
Comments (0)
URUAV UR3 Handbag Shoulder Bag with Sponge for Flysky FS-NV14 Nirvana Transmitter
US$19.99 US$30.99

Q: Does FrSky R9M module fits in one of those pouch near the handle?

Asked by dumle115 on 2019-02-23 06:03:29

UeigerChaves yes

2021-12-25 10:49:39 Helpful (0)
Submit
Answers (1)
dumle115 24/07/2019
I've bought them for my iFlight iH3 custom build. I've been using old series of emax's 1306 and those were ok, but now, with those RCINPower I am hell scared of flying. My drone became a speed demon and he is lipo hungry. But overall I'm satisfied, those motors are well made, magnets are strong, as others say, you can feel it as a premium product
RCINPower GTS-V2 1506 3000KV 4300KV 4-6S Brushless Motor for RC Drone FPV Racing
US$16.96 US$26.99
1
Recommendations
Comments (0)
GEPRC GEP-20A-F4 AIO F4 MPU6000 Flight Controller OSD 20A Blheli_S 2-4S Brushless ESC 26.5×26.5mm for Rocket Lite 3-5 Inch Cinewhoop Toothpick FPV Racing Drone
US$74.99

Q: Have anyone succesfully wired it up with the receiver via Fport?

Asked by dumle115 on 2020-02-02 05:20:05

Samchan No

2020-03-03 03:38:23 Helpful (0)
Submit
Answers (1)
dumle115 10/02/2020
I've ordered two batteries, both came in storage state with 3.9V per cell. Internal resistance is quite good as you can see in the picture. Im pleased. I'm looking forward to check if the capacity is true
Gaoneng GNB 7.4V 3000mAh 5C 2S DC5.5/XT60U-F Plug Lipo Battery for FAT SHARK FPV Goggles
US$17.58 US$35.99
0
Recommendations
Comments (0)
Skystars Mini TurboS F405 F4 Flight Controller Built In OSD 5V 2A BEC 2-6S 20x20mm For RC Drone
US$26.61 US$44.32

Q: What is betaflight's target (firmware)?

Asked by dumle115 on 2019-05-06 03:00:08

deespe OMNI F4SD is written on the PCB, this should be OMNISBUSF4SD

2020-01-07 04:00:04 Helpful (0)
Submit
Answers (1)
Geprc SKIP HD 3 118mm F4 3-4S 3 Inch Toothpick FPV Racing Drone BNF w/ Caddx Baby Turtle V2 1080P Camera
US$204.44 US$224.99

Q: which Lipo would you recommend ? 3s 650mAh ?

Asked by Cube2465 on 2019-12-07 03:17:03

dumle115 For cruising and more flight time for cinematic-like shots I would go with 3s 650mAh, but in everyday semi-freestyle/semi-cruising style I would go with 3s 450 mAh

2019-12-13 03:35:20 Helpful (0)
Submit
Answers (4)
NameLessRC AIO412 F4 Flight Controller AIO OSD BEC & Built-in 12A BL_S 2-4S ESC for Tinywhoop FPV Racing Drone
US$40.81 US$53.99

Q: is this 20x20 or 16x16

Asked by Riccardo Rutschmann on 2019-08-22 07:34:14

dumle115 Its probably common whoop style mounting holes: 25.5×25.5mm, M2

2019-09-10 01:39:47 Helpful (0)
Submit
Answers (1)
iFlight SucceX F4 V3 Mini Flight Controller 35A Blheli_32 2-6S ESC 5.8G 25/100/200mW Smartaudio VTX
US$76.21 US$91.67

Q: How much height space do I need to fit it in the drone?

Asked by dumle115 on 2019-06-18 12:30:16

Samchan It is about 25mm.

2019-07-03 03:31:23 Helpful (0)
Submit
Answers (1)
dumle115 20/02/2019
I thought those are solid red but in fact they are transparent red. I am satisfied anyway, I love their performance on my fullspeed leader120. Extra screws are always appreciate (◕‿◕)♡
10 Pairs Racerstar 2435PRO 2.4inch PC 4-blade Propeller 1.5mm Mounting Hole for RC Drone FPV Racing
US$8.21 US$14.99
0
Recommendations
Comments (0)
dumle115 30/01/2019
Bought them for iFlight iH3 with emax rs1306, but changed them for gemfan flash. Maybe in the future I'll use them, who knows. They look quiet good
10 Pairs Geprc 3042 3x4.2 3 Inch 3-Blade Propeller M5 Mounting Hole CW & CCW for RC FPV Racing Drone
US$11.29 US$11.59
0
Recommendations
Comments (0)
dumle115 30/01/2019
Ordered by mistake (wanted xt30 xd), but in the end I use them for quick checks. Just an ordinary plug
XT60 Male Plug 12AWG 10cm With Wire
US$6.99 US$8.99
0
Recommendations
Comments (0)
dumle115 30/05/2019
The tips are not perfect, but those tweezers are budget ones, so I'm quite satisfied. I hope tips won't bend after a few usages
ESD 10-15 Safe Anti-static Tweezer Maintenance Repair Nippers Forceps
US$5.99 US$7.99
0
Recommendations
Comments (0)
dumle115 30/01/2019
I've stacked it with FullSpeed FSD F411 Betaflight Flight Controller and I'm pleased with it's co-working. I put it on iFlight iH3, flies very well. The signal cable for ESCs makes the build super clean and easy. The motors I used are Emax RS1306 3300KV, nothing burned so far
Full Speed FSD328 Flytower Part 20x20mm 28A BLheli_S 2-4S DShot600 4 In 1 Brushless ESC for RC Drone
US$27.82 US$44.99
0
Recommendations
Comments (0)
dumle115 17/04/2019
I realy appreciate it's performance. It's surely much better than stock eachine's
URUAV UXII 5.8GHz 220Mhz 8.4dBi Gain 76 Degree RHCP FPV Patch Antenna With SMA/RP-SMA Connector
US$10.99 US$13.19
0
Recommendations
Comments (0)
dumle115 30/01/2019
Bought it for my iFlight iH3 build. Had to hot glue this to it's origin mount. I didn't compare it with other antennas but I'm pleased with the image quality, I have no issues using it. Probably I'd buy this again
Foxeer Pagoda Pro 5.8GHz 2dBi RHCP FPV Antenna 86mm UFL Black/Red/Orange
US$9.50 US$14.39
0
Recommendations
Comments (0)
dumle115 30/01/2019
I've stacked it with Full Speed FSD328 Flytower and I'm pleased with it's co-working. I put it in iFlight iH3, flies very well. 5V@3A BEC is enough to run RunCam Split v2 and that's all I wanted to achieve
20x20mm FullSpeed FSD F411 Betaflight Flight Controller Built-in OSD 5V 3A BEC for RC Drone
US$17.96 US$38.99
0
Recommendations
Comments (0)
dumle115 30/01/2019
It perfectly fits on iFlight iH3 and so far i had no issues with jello effect. The only problem was data cable (between camera and board), which RunCam resended me after mailing them. Be carefull with it!
RunCam Split Mini 2 FOV 130 Degree 1080P/60fps HD Recording & WDR FPV Camera NTSC/PAL Switchable
US$71.74 US$81.99
0
Recommendations
Comments (0)

You are the expert,can you help?

We sincerely invite you to subscribe to the Invite Answer email!

If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.

Help others and be happier!

  • Subscribe

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.Specific people will also have their own exclusive badge.
CEO Badge

The CEO Badge is owned only by the boss of Banggood.

Badges you can earn are coming soon
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe