VE64z4tj
My Contents
All Messages
Reviews
Comments
Answers
Questions

All Messages

Universal Full HD DIGITAL KU-BAND Single LNB Satellite Receiver
US$5.86 US$13.99

Q: Is the local oscillator frequency in this LNB stabilized with a PLL?

Asked by VE64z4tj on 2019-10-08 02:52:13

BG183217411 Full details can be find in description.

2022-02-22 05:00:30 Helpful (0)
Submit
Answers (3)
VE64z4tj 23/05/2019
Using an 8 element RG-6 colinear strapped to the balcony handrail I am getting >190 frames per second on ADSB#. This is approx 100% improvement over the dongle without the pre-amp. Max range observed so far is 400 km -- however my QTH is on top of a hill @ >1300m. In order to avoid the high gain of the preamp overloading the "front-end" of the DVB-T dongle I inserted a 20 dB attenuator on the output side of the preamp and disabled AGC in the ADSB# software. It was no problem for me to solder wires on to the lead from the feed-through capacitor to provide 5 VDC to power the pre-amp but a micro usb socket would have been much more convenient. I would really like to see some gain and bandwidth plots and also a more complete spec and schematic. When installing a pre-amp out of doors it is important to know what kind of input protection is provided. Overall I am quite happy with this pre-amp.
ADS-B 1090MHz RF Front End RF Amplifier LNA Module
US$32.74 US$50.99
2
Recommendations
Comments (1)
HDMI to USB3.0 Video Capture Card 4k60hz HD Acquisition Card with Audio Port Live Recording Box Game HD Video Recorder Zenhon T-403
US$30.99 US$37.99

Q: Has anyone tried this with a Raspberry Pi 4 and Android tablet?

Asked by VE64z4tj on 2020-12-23 12:02:11

Gerifield I used it with my Oneplus 5T without any issues, it worked. (With and USB-C travel adapter.)

2021-07-31 09:35:36 Helpful (0)
Submit
Answers (2)
10000W 0-220V SCR High Power Electronic Regulator Variable Regulator Voltage Regulator Converter
US$25.64 US$77.99

Q: What certifications does this product have? [UL? CSA ?] I don't see any RFI supression, e.g. common mode chokes, in the photos -- what RFI supression is incorporated in the device?

Asked by VE64z4tj on 2019-07-14 09:39:20

adilcetin 3 Yıldır Sorunsuz Kullanıyorum, hiç bir problem yaşamadım, 10Kw güce çok rahat dayanır, çünkü damıtma sisteminde 2250 watt 4 Adet Ceketli Isıtıcı ile birlikte kullandım, bütün sertifikaları karşılar

2021-07-30 01:50:32 Helpful (0)
Submit
Answers (1)
Excellway 2200-7000W Pure Sine Wave Inverter 220V 50HZ EU Standard 12V/24V LED Display Power Inverter
US$74.09 US$89.99

Q: What electrical certificates of compliance have been issued for this device?

Asked by VE64z4tj on 2018-02-19 03:09:55

L-G hehesåkandetgå noone

2021-02-18 02:40:29 Helpful (0)
Submit
Answers (1)
External GPS GLONASS Antenna Receiver Positioning Aerial Curved SMA Male Connector 3 Meters for Car Navigation
US$6.05 US$13.99

Q: Do I need a voltage insertion T ? What voltage does the pre-amplifier require? I don't see any voltage on the sma antenna connector of my Neo 7N GPS module.

Asked by VE64z4tj on 2021-01-01 11:41:11
Submit
Answers (0)
VE64z4tj 19/12/2018
connected input to 12VDC and output to Fluke voltmeter. Initial setting of the potentiometer, as received, gave approximately the input voltage. Adjusted the voltage down to just over 5 V. Further adjusting the potentiometer dropped the voltage to 0, more or less as expected. Turning the pot the other way brought the voltage up smoothly to over 30V under no load - continued turning the pot when there was a sudden voltage drop and the XL6009 started heating. Disconnected voltage immediately. Added 20 ohms of power resistors in series with the input and tried again. No output voltage. A resistance check across the out put showed approx 0.3 ohms -- more or less a dead short. Thought it might be one of the two caps filtering the output so I removed and tested these and then replaced them with new 50 V rated caps. Still no output and a shorted input. My conclusion is that it is possible to destroy the XL6009 by adjusting the output voltage in excess of 30V; i.e. no integral protection in the circuit on the higher voltage side. USE A VOLTMETER WHEN ADJUSTING THE POTENTIOMETER AND DO NO EXCEED MAXIMUM VOLTAGE SPECIFICATION.
Geekcreit® DC-DC Boost Buck Adjustable Step Up Step Down Automatic Converter XL6009 Module Suitable For Solar Panel
US$6.99 US$8.99
5
Recommendations
Comments (1)
RTL SDR Receiver V3 Pro With Chipset rtl2832 rtl2832u r820t2 for Ham Radio SDR RTL for 500 Khz-2 GHz UHF VHF HF AM FM
US$23.04 US$28.99

Q: The written "features" / specification shows 1 ppm TCXO however the photo of the PCB is labeled 0.5 ppm TCXO. Which is correct?

Asked by VE64z4tj on 2020-06-06 07:53:20

Lacon I have not see 0.5 ppm TCXO in the photo of the PCB.

2020-06-10 02:09:19 Helpful (1)
Submit
Answers (1)
VE64z4tj 14/04/2020
I bought the ESP8266 and the DHT11 modules to set up a remotely readable thermometer. As soon as I found the Github link on the product page, setup was pretty straight forward. I also found a variety of YouTube videos that explain how to add the board to Arduino IDE and set up a web server and give links to prepared sketches. Not much of a problem, even for someone with only very basic Arduino skills. In fact, the only issue I encountered was with the USB cable that I used. Lucky for me the first video I watched pointed out this possible issue and switching to a different USB cable connected the board to Arduino IDE.
D1 R2 V2.1.0 WiFi Module Based ESP8266 Module Geekcreit for Arduino - products that work with official Arduino boards
US$10.99
0
Recommendations
Comments (0)
VE64z4tj 14/04/2020
I bought the ESP8266 and the DHT11 modules to set up a remotely readable thermometer. As soon as I found the Github link on the product page, setup was pretty straight forward. I also found a variety of YouTube videos that explain how to add the board to Arduino IDE and set up a web server and give links to prepared sketches. Not much of a problem, even for someone with only very basic Arduino skills. In fact, the only issue I encountered was with the USB cable that I used. Lucky for me the first video I watched pointed out this possible issue and switching to a different USB cable connected the board to Arduino IDE.
KY-015 DHT11 Temperature Humidity Sensor Module
US$6.99 US$9.99
0
Recommendations
Comments (0)
VE64z4tj 08/04/2019
would benefit greatly from instructions in English. Regrettably, not everyone is able to read Mandarin.
FURRYTAIL A Cup Of Cat Grass To Hair Ball Seeds
US$5.23 US$7.99
2
Recommendations
Comments (0)
Switching Power Supply Driver AC 110V/220V To DC 12V 30A 360W Transformer for LED Strip Light
US$20.01 US$39.99

Q: 1) what certifications does this supply carry? 2) Is there a common mode choke and fuse on the 230V input side?

Asked by VE64z4tj on 2019-02-12 08:07:55

Alex Ithink so

2019-11-25 02:40:33 Helpful (0)
Submit
Answers (1)
VE64z4tj 08/02/2019
I use these magnets to make fridge magnets from my scroll saw work. These little magnets have plenty of holding power for this application. I use epoxy to glue the magnets to the work, first using my Dremel with a small milling bit as a mini plunge router to mount the magnets flush with the back of the work. The photo shows a figure cut from 6 mm plywood with magnets on the reverse so it can be attached to a fridge door.
50PCS N35 10mmx2mm Round Neodymium Magnets Rare Earth Magnet
US$5.28 US$13.99
1
Recommendations
Comments (0)
5-1500MHz 20dB Gain Wideband High Frequency RF Amplifier With Shielding Shell
US$8.70 US$8.73

Q: What is the noise figure @ 1.1 GHz for this amplifier?

Asked by VE64z4tj on 2019-09-27 03:43:37
Submit
Answers (0)
VE64z4tj 08/04/2019
these devices are very helpful for checking chargers and cables. for the price, everyone with a USB charger should have one.
DC 3-7.5V 0-5A V2.0 USB Voltage Current Meter Charger
US$0.99 US$9.99
0
Recommendations
Comments (0)
ADS-B 1090MHz RF Front End RF Amplifier LNA Module
US$32.74 US$50.99

Q: what is the noise figure?

Asked by VE64z4tj on 2019-04-01 01:24:14

Gossamer 1.0db

2019-04-06 09:02:08 Helpful (0)
Submit
Answers (1)
VE64z4tj 01/04/2019
tried one from the set on wood and aluminum and it worked well.
Drillpro 6pcs HSS 6542 M3-M10 Combination Drill Titanium Coated Tap Bit Set 1/4 Inch Hexagon Metric Deburr Countersink Bits Screw Thread Metric Tap
US$5.99 US$9.99
0
Recommendations
Comments (0)
VE64z4tj 01/04/2019
the rubber sanding drums become difficult to use after a few cycles
Drillpro 132pcs 120 Grit 1/4 3/8 1/2 Inch Sanding Drum with Sanding Mandrel Rotary Tool Accessories
US$10.99 US$13.99
0
Recommendations
Comments (0)
VE64z4tj 01/04/2019
Happy with these. I find that they are much easier to use than the little sanding drums for sanding curved edges of my scroll saw projects.
7pcs Flap Sanding Wheel 80-600 Grit With a 1/8 Inch Mandrel fit Dremel Grinder Rotary Tool
US$4.79 US$10.99
0
Recommendations
Comments (0)
VE64z4tj 27/12/2018
I tested the paste by applying a small amount to each side of a smd capacitor and then soldering it to a prototype board using my Hakko soldering station. No issues -- solder flowed well and left very little residue. This would not be a typical use but was acceptable as a test.
YIHUA 35g/40g Solder Paste Flux NO Clean High Preformance Paste BGA Rework Soldering Repair Tools
US$9.99 US$11.99
0
Recommendations
Comments (0)

You are the expert,can you help?

We sincerely invite you to subscribe to the Invite Answer email!

If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.

Help others and be happier!

  • Subscribe

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.Specific people will also have their own exclusive badge.
CEO Badge

The CEO Badge is owned only by the boss of Banggood.

Badges you can earn are coming soon
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe