LeoLuis
Q: 35A? that's it's what irun on my 5" *****kv 1500mah 4s 680gr .. this will handle it also?
Asked by kahuna_fpv on 2020-10-08 04:23:23
LeoLuis U can try 4s with motor output limit to 2400kv and see how it handles it. If no desync, u should be ok with 2600kv. Most likely will handle 6s too but max 1800kv
2020-10-19 09:51:05 Helpful (0)Q: can i fly *****kv motors on 6s? can handle it? xiexie
Asked by LeoLuis on 2020-10-02 01:40:24
Hobbyboy yes you can use these just don't over prop the motors, or run the motor full throttle all the time and they will be fine
2020-10-02 06:45:25 Helpful (0)
LeoLuis They dont work on 6s, they will get very hot or the motors wont spin as they should. At 1st I thought the esc burned but then, on 4s, the motors will spin normally. This would be an awesome product only if... well, stick to holybro tekko32 or Spedix es30. Those will fly 6s like charm
2020-09-24 10:07:50 Helpful (0)Q: who make these esc? airbot too? how reliable are they? the seem to be the cheap version of wraith32
Asked by LeoLuis on 2020-08-05 01:55:12
Jonnie Skystars.
2020-09-01 04:13:01 Helpful (0)Q: What KV is the limited with 6s?
Asked by KuriOSS on 2019-10-26 09:02:00
LeoLuis 2408 1900kv? Possible?
2020-06-24 09:59:25 Helpful (0)Q: can this stack handle large motors like *****kv or *****kv?
Asked by LeoLuis on 2020-05-28 08:16:27
Blenno phobia 3-6S input can be compatibled.
2020-06-02 01:16:16 Helpful (0)Q: when will this be available?
Asked by LeoLuis on 2019-05-03 03:14:36
cob2791 Ihaven't seen your question. I think now it's available;)
2020-05-15 01:35:01 Helpful (0)Q: how to connect the tbs Crossfire nano in this board? any guide?
Asked by LeoLuis on 2019-09-07 10:05:20
stevenlipinski i used the tx4 and rx4 pads on top of the FC and the 5v and ground on the bottom of the board. Then just go in to ports tab in beta flight and configure uart 4 as rx serial. and change protocol to crfs. Do not use the uart 3 as this is used for smart audio for vtx.
2019-09-19 12:20:25 Helpful (3)
Q: banggood is not in airbot partner shops list so its original clone :D
Asked by geduxk on 2018-08-16 11:05:17
LeoLuis They may get it from another seller that its in the list? 🤷🏻♂️
2018-09-01 02:43:49 Helpful (0)
Q: If it's like a game controller like it says above will it vibrate when I crash?
Asked by GreyKommander on 2018-06-22 09:48:52
LeoLuis Yes it will vibrate and will display “game over” in the LCD.
2018-07-17 09:24:18 Helpful (1)
Jason HM Compatible ,, FS-I6 with AFHDS-2A protocol
2018-03-14 09:16:20 Helpful (0)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
LeoLuis 2400kv 4s and 1950kv 6s
2020-11-06 06:43:57 Helpful (0)