Krotow
Krotow Addition to my previous review: NCV mode turned out as _hypersensitive_ - it react on live 220V AC wire from half meter or even more. Require to cover clamps and probe ports with hands to reduce sensitivity to acceptable level :( Besides NCV this tester works as advertised.
Krotow Adjustingof these two pieces is almost impossible. And when adjusted they dislodge or bend away soon enough. Those tweezer design have so much issues that it is not worth to count them.
Krotow Iwanted to change my review, but Banggood doesn't allow to do that. So... Actually if you want to have good SMD tweezer-like solution, either purchase proper tweezers (yes, those are very expensive) or use two soldering irons with T12, C115 or C245 tips. These tweezers use outdated heater and thermocouple ar PCB side combination (bad), needle tips (worse) and tip atjusting simply doesn't work (this drove me nuts almost every time I used these tweezers). Yihua, if you will read this - forget about Hakko 939 cloning. That soldering iron design is horribly outdated. At least upograde to pair of C115 tips, proper power supply and ask your partners in garage Aixun about how they made their T3A/T3B stations.
The seller You can consult online customer service https://www.banggood.com/Contact-Us_hi111
2022-11-02 09:57:55 Helpful (0)
Krotow Should work over HDMI via any compatible PC monitor. Or over HDMI to USB capture adapter as regular camera in VLC or camera applications.
2022-11-01 07:12:22 Helpful (0)
Krotow Because bateries was already used and had different charge levels at begin. Which cause separate current at each channel.
Q: Is this in series or parallel please?
Asked by FlyingHighh on 2022-05-12 02:18:29
Krotow Series.
2022-05-12 03:51:56 Helpful (0)Q: can i bind this with emax tinyhawk 2 freestyle?
Asked by BG845418144 on 2022-03-16 05:10:30
Krotow This is protective silicon shell around Jumper T-Lite transmitter. And not the transmitter itself.
2022-03-16 05:33:47 Helpful (0)
Krotow Itis more like that batteries are discharging through charger after charging. And batteries should not left unattended connected to charger for entire night anyway.
Q: How much amps these support through board? 20? 40? 60?
Asked by Krotow on 2021-12-11 11:08:24
AKNY I would check with your flight controller
2022-01-03 12:35:43 Helpful (0)Q: what are the dimensions of the vtx?
Asked by wong4can on 2022-01-01 03:00:10
Krotow It is a half-triangle from 28.5 x 28.5mm flight controller.
2022-01-02 02:58:25 Helpful (0)
We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
