BG111004413
Q: are the rollers one way only
Asked by Nudger44 on 2023-11-16 12:46:32
BG111004413 I believe they can be reversed....
2024-01-29 10:46:46 Helpful (0)Q: what's the max reach, ie distance from mitre slot slider to edge of wheel
Asked by BG111004413 on 2024-01-21 01:05:58
BG561357124 From the side of the mitre slot nearest to the edge of the wheel the distance is 115mm or 4.5 inches. Hope this helps.
2024-01-22 03:38:08 Helpful (1)Q: Why a textured shaft? Isn't that going to cause more wear
Asked by BG111004413 on 2022-01-23 12:01:46
BG492552502 HiTo answer your question the clamp is designed for MFT style benches which have a top made of MDF and is usually 18mm thick. The clamp works by being forced against the sides of the dog hole by the downward force exerted on the work piece. Because the hole is only 18mm deep and MDF is relatively soft a plain shaft would not have enough friction and would slip in the hole. The original carpenters hold fast had a plain shaft but usually was fitted into a hole 50 mm deep in a bench made from a hard timber. To answer the second part of your question, yes the textured shaft will cause some wear to the dog hole. This will occur at the top and bottom edges of the dog hole as the clamp is forced against the sides of the hole. Inserting and removing the clamp will also cause some wear as the shaft acts as a reamer. This will probably not be too detrimental to the operation of the dog hole. Hope this explains how these clamps work and why they are made this way.
2022-01-27 11:59:21 Helpful (3)
BG111004413 I wasted my money on this. Nowhere near enough adjustment
2023-04-23 11:32:53 Helpful (0)
BG111004413 Absolutely square.
2023-02-21 06:16:52 Helpful (0)Q: does it fit with bosch track saw?
Asked by caecian on 2023-01-02 09:10:16
BG111004413 No. This version is for Festool, makita and Triton tracks
2023-01-02 11:47:08 Helpful (0)
BG111004413 No its not included.
2021-10-30 11:27:14 Helpful (5)
BG111004413 No but they are steel so will stick to a magnet
2021-10-17 11:30:05 Helpful (1)
BG111004413 Surely if you widen the holes you lose the accuracy.
Q: Hello, what diameter hole are these dogs for, 20mm? Thank you. Mark
Asked by markscott on 2020-09-15 01:46:41
BG111004413 These will trash your mft top
2021-02-18 03:42:03 Helpful (0)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
BG111004413 there is a Jessem style system available. unfortunately I can't post the link. I think its by Hondui.
2024-01-29 10:52:26 Helpful (0)