All Messages

Philiski the maximum camera resolution is 640x480 at 25-30 frames per second. The picture provided by this camera is very clear at that resolution. I use it to zoom in on circuit boards and SMD chips and it works well.

2022-04-15 10:38:47 Helpful (0)
Submit
Answers (2)

Q: Is this product assembled?

Asked by Rodriguinho Feitosa on 2018-03-04 07:39:07

Philiski unfortunately mine did come assembled already.

2021-12-08 11:09:09 Helpful (0)
Submit
Answers (4)

Q: Could you recommend me a transformer for it? thanks in advance

Asked by oriol.aniceto on 2018-06-05 10:07:33

Philiski the amplifier will require a 12v-0-12v center tap transformer with a minimum of 2amps to operate affectionately. hopefully this will help you. if you need any further assistance please let me know.

2021-12-08 11:07:02 Helpful (0)
Submit
Answers (2)

Philiski it comes with a premolded 5.5mm connector. that is usually the standard for 12v. in order to use the panel with a 5v female connector. you will need to use a 12v female to 5v male adapter.. the 5v male will measure 2.5mm. hope you have found this helpful. if you need further assistance, pleas feel free to ask.

2021-12-08 10:57:15 Helpful (0)
Submit
Answers (1)

Q: venden el ic pic programado, solamente???

Asked by Macvi on 2021-09-02 05:27:35

Philiski I'm not sure I understand your question ⁉️. can you try and rephrase it?

2021-11-04 12:44:18 Helpful (0)
Submit
Answers (1)

Q: where can I purchase 20amp fuses for these fuse holders?

Asked by Giles on 2021-10-27 08:42:10

Philiski the fuse holder is recommended for use with a max 10-15 amp fuse. I would not try placing a 20 amp fuse in the holder. it can case damage. hope you find this helpful.

2021-11-04 12:43:23 Helpful (0)
Submit
Answers (1)

Q: Ford It comes with the paper schematic?

Asked by ealbo99 on 2021-11-03 05:53:37

Philiski it comes with a list of components and a numbered board. you can check off what you install as you go along. it also has a paper schematic. hope you find this helpful.

2021-11-04 12:41:13 Helpful (0)
Submit
Answers (2)

Q: What type of glue can you recommend to get the job done?

Asked by BG461636453 on 2021-11-04 10:58:49

Philiski I didn't use any glue on mine. pieces fit together enough but can be tricky to do. crazy glue is usually the glue of choice. make sure you have the correct pieces in the correct place before glueing any. hope you find this helpful.

2021-11-04 12:39:08 Helpful (1)
Submit
Answers (1)

Q: Olá! Amigos, esse kit inclui o box de acrílico para exposição?

Asked by JuniorFons on 2019-05-19 07:35:33

Philiski No. check the descriptions carefully.

2021-08-10 06:11:41 Helpful (0)
Submit
Answers (2)

Q: 100V avalable?

Asked by gansobabachan on 2019-04-21 05:34:56

Philiski the power adapter is available for 120v - 240v ac. the camera actually runs off a 5v DC usb cable from the power adapter. if you already have a power adapter for your country and it supplies a 5V DC output with a minimum of 2amps current, you will be fine.

2021-08-10 06:10:00 Helpful (0)
Submit
Answers (2)

Philiski I would recommend you use a multimeter to measure your mains voltage.

2021-08-10 06:03:15 Helpful (0)
Submit
Answers (6)

Q: what temperature range does it work in?

Asked by BG165578844 on 2021-08-10 05:20:31

Philiski I don't know what it's rated for but, in my location it has already been subject to 45° F to 85° F including heavy rain and lightning. as the winter rolls in we can go as low as -5° F. so far it works great, and stays lit for 4-6 hours depending on how much sun it gets.

2021-08-10 06:00:43 Helpful (0)
Submit
Answers (1)

Q: i want this product in bult please share your details on ***** thanks

Asked by Abhishek Thakur on 2018-09-21 06:00:24

Philiski Idon't understand your question?

2021-06-28 11:29:16 Helpful (0)
Submit
Answers (2)

Q: why is the tracking number not trackable ?

Asked by alcomys on 2018-02-11 02:56:25

Philiski Ihope it is by now. lol

2021-06-28 11:28:44 Helpful (0)
Submit
Answers (3)