john4565
Q: Which connector does Banggood define as a Male or Female?
Asked by john4565 on 2020-10-09 04:32:01
Q: Do i use Elevon or V tail mixing on this or no mixing?
Asked by KiwiChristian on 2018-02-20 11:55:59
john4565 It depends which control head mode you choose to build; the mode shown in the first large image at the top of this page (the control arms at right angles) will not require any mix, whereas the mode shown in the second large image (control arms straight) will require an elevon mix. At the end of the day you want right aileron to make the right side of the rotors drop and down elevator will make the front of the rotors drop.
2018-06-04 07:25:51 Helpful (6)
john4565 Hold the Luobo by the rotor head and the nose should be pointing slightly down (about a 15° down angle from horizontal).
2018-06-04 07:03:19 Helpful (0)
john4565 I used a Racerstar BR2208 1400KV with an 8x4 propeller. My testing shows a current draw of 11amps at wide open throttle on a 3S LiPo. It performs very well in the Luobo.
2018-06-04 06:59:58 Helpful (2)
Lanny Hello, you can convert it by yourself.
2018-06-07 03:28:18 Helpful (0)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
gbrookes Male is a pin, Female is a socket the pin fits in to. Same as everyone else does. @mikelopez, when you order you can select to get male or female connectors. Does it say in your order that you specifically selected male instead of female? Using both means connecting different things is much easier and safer with no bare wires or alligator clip connections...
2021-09-11 01:01:02 Helpful (0)