clue_to_everything
Q: Can I use this gimbal with MJX Bugs 4W 4K ? Will my drone be able to lifted?
Asked by NR2010 on 2021-12-30 08:00:01
Q: How many volts minimum and maximum?
Asked by m1s on 2020-02-02 12:26:09
clue_to_everything it starts working at 11.5v at 9v only led will light up but motors won't move at 12v it's the best , max I haven't tested
2022-01-02 02:06:45 Helpful (0)Q: what is a good power supply for this?
Asked by BG103254534 on 2020-09-23 03:35:15
clue_to_everything Use A 12V 10 Amp SMPS , Make Sure The SMPS has fuse for safety
2022-01-02 02:05:06 Helpful (0)Q: can I use a 4s battery? I don't have a 3s
Asked by ItoSan on 2019-02-06 02:59:13
clue_to_everything NO, 4s voltage is very high , however please refer to your flight controller data sheet and check does it have pins for bgc or gimbals , or try to figure out if you can get voltage anywhere between 10-12 volts from your flight controller
2021-09-06 10:02:07 Helpful (0)Q: Will this work with an SJCAM SJ4000 camera?
Asked by BG349326121 on 2020-11-09 07:22:48
clue_to_everything itshould
2021-08-30 07:55:25 Helpful (0)
clue_to_everything onlyGimbal is provided , Camera is not included
2021-08-30 07:54:58 Helpful (0)
clue_to_everything onlyGimbal is provided , Camera is not included
2021-08-30 07:54:51 Helpful (0)Q: How do I control the motors with Arduino? Do I need ESC? Or I can directly control through Arduino?
Asked by chen740909527 on 2019-07-10 03:16:30
BG127145371 yes connect the control pin to digital pin on arduino and control it with PWM
2021-08-23 10:43:11 Helpful (0)Q: My gimbal is shaking like hell
Asked by Nitin Gupta on 2018-03-11 07:56:43
BG127145371 solution - kindly attach your camera to the gimbal and balance it in center now place or mount on a level surface and power it on if it still shakes download the GUI and calibrate it to download click on the link given in product description box , right click and click open in new tab it will start downloading
2021-08-23 10:38:59 Helpful (0)
Q: Can it be used with long cameras like Mobius/runcam/Hawkeye Firefly q6?
Asked by sarlenga on 2019-11-18 07:49:32
BG127145371 yes you can use but be sure to make a research on calibration , adjustments , weight etc else no issues it should work
2021-08-21 01:39:21 Helpful (2)
BG127145371 no you will be getting only gimbal , no camera will be given
2021-08-21 01:38:30 Helpful (0)
Lee Before powering up the gimbal, you should install the camera on the gimbal, or it will keep shaking. Also you can try to calibrate it.
2021-07-26 03:46:58 Helpful (0)
liftman Yes you can you will loose some flight time.experiment with some different prop pitches if you like.
2021-07-17 10:13:07 Helpful (1)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
clue_to_everything check the Thrust produced it should be twice the weight of drone, if it's producing then it can lift else no
2022-01-02 02:08:13 Helpful (0)